ETC Element - Page 484

472 Eos Family v2.9.0 Operations Manual
OSC Method Arguments Examples/Comments
<parameter 1>/<parameter
2>/...
multiple numbers for each
parameter level
(set channel 1 pan & tilt to
90)
/eos/chan/1/param/pan/
tilt=45,90
(set channel 1 pan to 45 & tilt
to 90)
/eos/chan/<number>/param/
<parameter>/dmx
number for parameter DMX
level
/eos/chan/1/param/pan/
dmx=255
/eos/chan/<number>/param/
<parameter 1>/<parameter
2>/.../ dmx
number(s) for parameter DMX
level(s)
/eos/chan/1/param/pan/tilt/
dmx=255
Channel Output Information – see Implicit OSC Output (on page489) for more information
/eos/out/active/chan
String with active channels
(selected) and current value
from first channel
/eos/out/active/chan=
”1-2 [100]”
Absolute Levels
Absolute level commands are used when there is an existing target already selected on the
command line of the OSC user.
OSC Method Arguments Examples/Comments
Set levels
/eos/at number for the level (0-100)
/eos/at= 75 (useful for
mapping to an OSCfader)
/eos/at/out
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/at/out
/eos/at/home
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/at/home
/eos/at/remdim
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/at/remdim
/eos/at/level
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/at/level
/eos/at/full
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/at/full
/eos/at/min
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/at/min
/eos/at/max
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/at/max
/eos/at/+%
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/at/+%