ETC Element - Page 485

Show Control 473
OSC Method Arguments Examples/Comments
/eos/at/-%
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/at/-%
Set parameter or DMX information
/eos/at/dmx number for the DMX level
/eos/at/dmx/128 (useful for
mapping to an
OSC slider)
/eos/param/<parameter> number for the level
/eos/param/pan=270 (useful
for mapping to an OSC slider)
/eos/param/<parameter>/out
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/param/pan/out
/eos/param/<parameter>/home
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/param/pan/home
/eos/param/<parameter>/level
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/param/pan/level
/eos/param/<parameter>/full
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/param/pan/full
/eos/param/<parameter>/min
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/param/pan/min
/eos/param/<parameter>/max
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/param/pan/max
/eos/param/<parameter>/+%
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/param/pan/+%
/eos/param/<parameter>/-%
number for the button edge
1.0=down, 0.0=up
(optional)
/eos/param/pan/-%
/eos/param/<parameter 1>/
<parameter 2>
number for all parameter
levels
multiple numbers for each
parameter level
/eos/param/pan/tilt=45 (set
pan & tilt to 45)
/eos/param/pan/tilt=45,90 (set
pan to 45 & tilt to 90)
Color
OSC Method Arguments Examples/Comments
/eos/color/hs
Argument 1: Hue (0.0-
360.0) Argument 2:
Saturation (0.0-100.0)
/eos/color/hs=330.0, 75.0 (pink color with 75% sat-
uration)
/eos/color/hsxy
Argument 1: X (0.0-
1.0) Argument 2: Y
(0.0-1.0)
For simulating the Hue/Saturation wheel in a 2D XY
graph where bottom-left corner is (0.0, 0.0) and top-
right corner it (1.0, 1.0) /eos/color.hsxy=0.82, 0.31
(pink color with 75% saturation)
/eos/color/rgb
Argument 1: Red (0.0-
/eos/color/rgb=1.0, 0.25, 0.63 (pink color with 75%