ETC Element - Page 492

480 Eos Family v2.9.0 Operations Manual
OSC Method Arguments Examples/Comments
stop
/eos/fader/<index>/<fader index>/
fire
none /eos/fader/1/2/fire
/eos/fader/<index>/<fader index>/
out
none /eos/fader/1/2/out
/eos/fader/<index>/<fader index>/
home
none /eos/fader/1/2/home
/eos/fader/<index>/<fader index>/
min
none /eos/fader/1/2/min
/eos/fader/<index>/<fader index>/
max
none /eos/fader/1/2/max
/eos/fader/<index>/<fader index>/ full none /eos/fader/1/2/full
/eos/fader/<index>/<fader index>/
level
none /eos/fader/1/2/level
/eos/fader/<index>/<fader index>/
+%
none /eos/fader/1/2/+%
/eos/fader/<index>/<fader index>/-
%
none /eos/fader/1/2/-%
Fader Status Information – see Implicit OSC Output (on page489) for more information
/eos/out/fader/<index>/<fader>/name
String argument
with fader label
for OSC fader
/eos/out/fader/1/1=
“S 1 Label”
Sub 1 with a label “Label”
/eos/out/fader/1/2=
“IP 1 Label”
IP 1 fader labeled “Label”
/eos/out/fader/<index>/<fader>/name
Floating point
argument for
fader percent
(0.0-1.0)
/eos/out/fader/1/1=0.75
/eos/out/fader/1/2=0.0
/eos/out/fader/<index>
String
argument,
descriptive text
for OSC fader
bank at index
/eos/fader/1=“1”
Key
Note: For a list of supported key names, see Eos OSCKeys.
OSC Method Arguments Examples/Comments
/eos/key/<name>
number for button edge:
1.0=down, 0.0=up (optional)
/eos/key/select active=1.0 (press
[Select Active] but- ton)
/eos/key/select active=0.0 (release
[Select Active] but- ton)
/eos/key/go 0