ETC Element - Page 493

Show Control 481
OSC Method Arguments Examples/Comments
(press & release [Go] button)
Note: For the slash key, use a backslash /eos/key/\
Address
OSC Method Arguments Examples/Comments
Selection
/eos/addr
number for address to
select
/eos/addr=513
Set Levels (Parks address while on the OSC command line)
/eos/addr/<address>
number for level to set
address to (0-100)
/eos/addr/513=100 (useful for
mapping to an OSC slider)
/eos/addr/<address>/dmx
number for DMX level to set
address to (0-255)
/eos/addr/513/dmx=255 (useful for
mapping to an OSC slider)
Magic Sheet
OSC Method Arguments Examples/Comments
/eos/ms number of the magic sheet to open /eos/ms=1
/eos/ms/<ms
number>
number of the magic sheet view to
open (optional)
/eos/ms/1=2
Group
Selects and controls channels in groups.
Note: Same syntax and behavior as Chan.
OSC Method Arguments Examples/Comments
/eos/group
number for group to
select
/eos/group=1
/eos/group/<number>
number for channel
level
/eos/group/1=75
/eos/group/<number>/out
number for button
edge:
1.0=down, 0.0=up
(optional)
/eos/group/1/out
/eos/group/<number>/home
number for button
edge:
1.0=down, 0.0=up
(optional)
/eos/group/1/home
/eos/group/<number>/level
number for button
edge:
1.0=down, 0.0=up
(optional)
/eos/group/1/level
/eos/group/<number>/full
number for button
edge:
1.0=down, 0.0=up
(optional)
/eos/group/1/full