ETC Element - Page 494

482 Eos Family v2.9.0 Operations Manual
OSC Method Arguments Examples/Comments
/eos/group/<number>/min
number for button
edge:
1.0=down, 0.0=up
(optional)
/eos/group/1/min
/eos/group/<number>/max
number for button
edge:
1.0=down, 0.0=up
(optional)
/eos/group/1/max
/eos/group/<number>/+%
number for button
edge:
1.0=down, 0.0=up
(optional)
/eos/group/1/+%
/eos/group/<number>/-%
number for button
edge:
1.0=down, 0.0=up
(optional)
/eos/group/1/-%
/eos/group/<number>/dmx
number for dmx level
1.0=down, 0.0=up
(optional)
/eos/group/1/dmx=127
/eos/group/<number>/param/
<parameter>
number for parameter
level
/eos/group/1/param/pan=90
/eos/group/<number>/param/
<parameter 1>/<parameter
2>/...
number(s) for
parameter levels
/eos/group/1/param/pan/tilt=90,75
/eos/group/<number>/param/
<parameter>/dmx
number for parameter
dmx level
/eos/group/1/param/pan=255
/eos/group/<number>/param/
<parameter 1>/<parameter
2>/.../ dmx
number(s) for dmx
parameter levels
/eos/group/1/param/pan/tilt/dmx=255
Macro
Selects and fires (executes) macros
OSC Method Arguments Examples/Comments
/eos/macro number for macro to select /eos/macro=1
/eos/macro/fire number for macro to run /eos/macro/fire=1
/eos/macro/<number>/fire
number for button edge: 1.0=down,
0.0=up (optional)
/eos/macro/1/fire=1.0
Submaster
OSC Method Arguments Examples/Comments
Select Submaster
/eos/sub number for sub to select /eos/sub=1
Control Submaster
/eos/sub/<number>
floating point number to set sub
percent to
/eos/sub/1=0.75 (useful for
mapping to an
OSC slider)
/eos/sub/<number>/out
number for button edge: 1.0=down,
/eos/sub/1/out