Installing the ETERNUS CS800 S5 Modules Further Configurations
U41840-J-Z125-7-76 101
The port role can be changed on page Configuration > PTT > FC Initiators & Targets of
the Remote Management Console.
Further Configurations
Before you can begin using the ETERNUS CS800 S5 for backups, you must configure the
system for VTL, NAS or OST. See the following chapters in this book for detailed instruc-
tions for completing each type of configuration, especially Chapter "Accessing Remote
Management" for information about how to access the ETERNUS CS800 S5 Web Pages
and Chapter "Configuration" for detailed information about configuration options.
To Next Page
Loading...
