U41840-J-Z125-7-76 15
Preface
This manual introduces the FUJITSU Storage ETERNUS CS800 enhanced data protection
system and provides information about:
● Features and Hardware
● Installation
● System operations
● Configuration
● Web interface
● Basic troubleshooting
● Basic spare parts replacement procedures
I
This manual applies to the ETERNUS CS800 V2.3.1 software which supports the
ETENUS CS800 S5 hardware. For hardware related topics for an ETERNUS
CS800 S2/S3/S4 system, please continue to use the appropriate manual.
Audience
This manual is written for ETERNUS CS800 system operators and system administrators.
I
It is useful for the audience to have a basic understanding of Windows, Linux, and
UNIX® as well as backup/recovery systems.
Document Organization
Following is a brief description of chapter contents.
● Chapter "Important Information" provides essential information regarding safety when
working on your ETERNUS CS800.
● Chapter "System Description" provides an overview of the ETERNUS CS800 system.
● Chapter "Hardware Description and Basic Operations" describes the hardware compo-
nents of the ETERNUS CS800 system and instructions for turning on/off the system.
● Chapter "Installing the Rack",
Chapter "Installing the ETERNUS CS800 S5 Modules",
Chapter "Initial Configuration, Connecting with the Network" describe all steps to install
the hardware for the ETERNUS CS800 S5 system and the initial software configuration.
To Next Page
Loading...
