U41840-J-Z125-7-76 437
Figure 265: Settings Page
To enable or disable NetServer on the target ETERNUS CS800:
1. Select Enable NetServer to enable NetServer.
Or select Disable NetServer to disable NetServer.
2. Click Apply.
I
You should disable NetServer on the target system when you are done analyzing
network performance.
Disk
The Disk Analyzer page allows you to analyze disk performance by measuring disk read
and write throughput.
To access the Disk Analyzer page, on the Analyzer page, click the Disk tab (see
Figure 266).
To Next Page
Loading...
