Fujitsu ETERNUS CS800 S5 - Connecting the System with the Network; LAN Cabling

Connecting the System with the Network Installing the ETERNUS CS800 S5 Modules
98 U41840-J-Z125-7-76
Connecting the System with the Network
LAN Cabling
The LAN cabling depends on your ETERNUS CS800 S5 variant as shown in the following
sections.
Entry System
Connect the Ethernet cables to the server module as shown in the figures below.
Figure 55: Entry System
Figure 56: Entry System with 10 Gb/s Ethernet option
65 4 3 2 1
Server
4 x 1 Gb/s Eth link
1 Gb/s Eth link
65 4 3 21
Server
4 x 1 Gb/s Eth link
1 Gb/s Eth link
2 x 10 Gb/s Eth link