268 U41840-J-Z125-7-76
● Rejection List FIle
To install a file, click the Browse button to browse the system and locate the file, and
then click Open. Click Install to install the selected file on the ETERNUS CS800.
V
CAUTION!
Installing certificate files requires a system reboot immediately after the
changes are applied. Wait for at least 15 minutes before logging back in.
I
You can install new certificate and key files at any time, as long as there are no
active network connections between the OST media server and the ETERNUS
CS800.
I
To remove all certificate and key files, click Restore Factory Defaults.
4. Click Apply.
I
To use Accent, you must install the Fujitsu OST Client Plug-in on the media server.
For information about installing the OST Plug-in and using Accent, see the
ETERNUS CS800 OST Guide.
OST Client Plug-In
Use the OST Client Plug-In page to download the Fujitsu OST Plug-in.
OST (OpenStorage) technology allows Symantec NetBackup and Backup Exec to
seamlessly integrate with the ETERNUS CS800. Using OST, NetBackup and Backup Exec
can manage backups through the ETERNUS CS800 and can take advantage of the
system's capabilities, such as data deduplication and replication. To use OST, you must first
download the OST Plug-in and install it on the NetBackup or Backup Exec media server.
To download the OST Plug-in, click Client Plug-in Download. This opens the Fujitsu
Technical Support web page with the download area. On this page follow the instructions
provided at the OST Client Plug-In page and download the correct OST Plug-in for your
backup application and operating system. Follow the included instructions to install the OST
Plug-in on your media server.
I
For information about configuring and using OST with the ETERNUS CS800, see
the ETERNUS CS800 OST Guide.