Fujitsu ETERNUS CS800 S5 - Receive NAS; Received Snapshots

Replication Receive NAS
U41840-J-Z125-7-76 357
Receive NAS
The Receive NAS page allows you to manage incoming replication activity for NAS shares.
You can recover a replicated share on the target system if the source system is unavailable.
Once the source system becomes available, you can failback the share to make it available
on the source system again.
I
Before you can receive replicated shares, you must specify one or more replication
sources (see "Adding a Replication Source" on page 239).
To access the Receive NAS page, click the Replication menu, and then click the
Receive > NAS tab.
Use the Receive NAS page to perform the following tasks:
● View received snapshots and recover, failback, or delete snapshots (see "Received
Snapshots" on page 357).
● Manage recovery jobs (see "Recovery Jobs" on page 363).
● Manage failback jobs (see "Failback Jobs" on page 365).
● Manage shares configured for Directory/File Based Replication (see "Directory/File
Based" on page 366).
Received Snapshots
The Received Snapshots page allows you to view and work with received snapshots.
When a replicated NAS share is received from a source system, it is saved as a snapshot.
The snapshot contains all of the data necessary to fully recover or failback the share to the
point in time when the snapshot was saved.
To access the Received Snapshots page, on the Receive NAS page, click the Received
Snapshots tab (see Figure 217).