OST Wizard Configuration Wizards
154 U41840-J-Z125-7-76
Step 1: About
1. Read the information about the wizard (see Figure 98).
The About page displays the status of the OST service. OST settings can be
configured in Ready, Stopped, or Verifying state. The OST server is available for
backup only in Ready state.
2. Click Next to continue.
I
At any time while using the wizard, you can click Previous to return to the previous
step.
Figure 98: OST Wizard
Step 2: Add Storage Servers
1. Under Add Storage Server, enter information about the storage server (see
Figure 99):
● Name - Enter the name of the storage server.
V
CAUTION!
Do not use an underscore ( _ ) in the name of the storage server.
● Description - (Optional) Enter a brief description of the storage server.
● Max Connections - Enter the maximum number of connections allowed to the
storage server (3 to 65536).
To Next Page
Loading...
Need help?
General