U41840-J-Z125-7-76 137
Configuration Wizards
The Configuration Wizards provide guided assistance for setting up the ETERNUS
CS800. Use the wizards to quickly configure the most important features of the system,
including storage presentation and data replication. Each wizard leads you step-by-step
through the configuration process.
The Configuration Wizards page displays the first time you log on to the remote
management console after completing the Getting Started wizard. After that, to access the
Configuration Wizards, click Wizards on the main menu. This replaces the main menu
with the Wizards menu (see Figure 85).
The Wizards menu includes the following wizards:
● NAS - Helps you configure the ETERNUS CS800 as a NAS (Network Attached
Storage) appliance for use on a Windows or UNIX/Linux network (see "NAS Wizard" on
page 138).
● VTL - Helps you configure the ETERNUS CS800 to present its storage as one or more
VTL (Virtual Tape Library) partitions for use with a backup application (see "VTL
Wizard" on page 145).
● OST - Helps you configure the ETERNUS CS800 to present its storage as one or more
OST (Open Storage) storage servers for use with a backup application (see "OST
Wizard" on page 153).
● Replication - Helps you configure the ETERNUS CS800 to send replicated data to or
receive replicated data from another system (see "Replication Wizard" on page 160).
● Email Alerts - Helps you configure the ETERNUS CS800 to automatically send notifi-
cations and reports to selected recipients (see "Email Alerts Wizard" on page 168).
● AIS (Advanced Infrastructure Solutions) Connect - Helps you improve the
ETERNUS CS800 service and support by providing integrated monitoring (call-home)
and remote access (dial-in) services (see "AIS Connect" on page 172).
Click an item on the Wizards menu to begin a wizard. After you complete a wizard, a green
check mark displays next to its name on the Wizards menu. To display the main menu
again, click Exit.
To Next Page
Loading...
