Fujitsu ETERNUS CS800 S5 - Scale

Locating the Mounting Position Installing the ETERNUS CS800 S5 Modules
82 U41840-J-Z125-7-76
Figure 38: Recommended Positions of the Modules in the Rack for Entry
Scale
With the Scale module the recommended mounting positions are as follows (also see
Figure 40):
a) Server module on the highest (Variant 2) or lowest position (Variant 1).
b) Storage base module directly under or above it
c) All storage expansion modules directly under or above the storage base module.
V
CAUTION!
The DX80 S2 storage expansion modules are preconfigured and assigned by
numbers in the factory. This sequence must be observed precisely when they are
mounted. Otherwise the system does not work.
The numbers assigned in the factory are put on the front side and at the rear frame
of the units. See also Figure 39.
Table 18 shows the numbering schemes for the storage array(s).
Table 18: Numbering of the Storage Modules for a Scale System
Entry - Variant 2 Entry - Variant 3
Server
Server
S
Se
S
Se
Se
Se
Se
Se
Se
S
e
e
e
e
Se
e
e
e
e
Se
Se
Se
Se
e
e
e
e
S
e
e
e
e
e
e
e
S
e
e
e
e
e
e
e
e
e
e
e
e
S
e
e
e
e
e
Se
e
e
e
e
e
e
e
e
e
e
e
e
e
S
e
e
e
S
S
S
S
e
e
e
r
rv
rv
rv
rv
rv
rv
r
r
r
rv
r
r
r
rv
r
r
r
r
r
rv
v
r
rv
r
r
r
r
r
r
rv
r
r
r
v
erer
er
er
r
r
r
r
r
er
r
e
r
r
er
e
e
e
r
r
r
r
r
Server
e
S
S
S
S
Se
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Se
Se
Se
Se
Se
Se
Se
Se
Se
Se
Se
S
e
e
Se
Se
e
Se
S
Se
Se
e
Se
S
Se
e
S
e
S
S
S
S
e
e
rv
rv
rv
rv
rv
rv
rv
rv
r
rv
rv
rv
rv
v
rv
v
r
v
v
rv
v
v
rv
erer
er
er
e
er
er
e
er
e
e
er
r
er
e
e
er
r
r
r
e
r
e
e
r
r
r
JX40
Server
Entry - Variant 1
JX40
Server
Storage Modules Denotation
DX80 base CE
1. DX80 expansion module on the DX80 base DE-1
2. DX80 expansion module on the DX80 base DE-2
3. DX80 expansion module on the DX80 base DE-3
4. DX80 expansion module on the DX80 base DE-4
::