U41840-J-Z125-7-76 301
Security
The Security page allows you to configure security settings for the ETERNUS CS800,
including access passwords, SSL settings, and the inactivity timeout.
To access the Security page, click the Configuration menu, and then click the Security
tab.
The Security page contains the following tabs:
● "Web & CLI Passwords"
● "SSL"
● "Login Session"
● "Security Notice"
● "Storage Encryption (Scale model only)"
Web & CLI Passwords
The Web & CLI Passwords page allows you to change the account passwords for the
remote management console (Web) and the command line interface (CLI). You can also
enable or disable the CLI account.
The ETERNUS CS800 has two access levels for logging onto the remote management
console or the CLI:
● Monitor - Allowed to view information on the ETERNUS CS800 remote management
console or the CLI but cannot make changes.
● Administrator - Allowed to view and change information on the ETERNUS CS800
remote management console or the CLI.
To access the Web & CLI Passwords page, on the Security page, click the Web & CLI
Passwords tab (see Figure 186).
To Next Page
Loading...
