VTL Wizard Configuration Wizards
152 U41840-J-Z125-7-76
Figure 96: VTL Wizard: Map Remote Hosts
Step 6: Confirm
1. Review the settings you selected to make sure they are correct (see Figure 97). If
necessary, click Previous to return to a previous step to make changes.
2. To make changes to a VTL partition, media, or host access group you added, first select
the item and click Delete to delete it. Then click Previous to return to the appropriate
step and add a new item.
3. After you have confirmed all settings, click Finish. The wizard configures the
ETERNUS CS800 with the settings you selected.
To Next Page
Loading...
