Configuration Wizards Replication Wizard
U41840-J-Z125-7-76 163
Figure 105: Replication Wizard: System
Step 3: NAS Shares
1. Select a NAS share in the Replication Settings for NAS Shares section to manage
its replication settings (see Figure 106).
I
For help adding NAS shares to the system, use the NAS Configuration Wizard
(see "NAS Wizard" on page 138).
2. To configure the share to replicate its data to another system, enter the following infor-
mation under Send:
a) Select the Enable replication for selected share check box to enable replication
for the share.
To Next Page
Loading...
