Additional Specifications for Entry Model System Specifications S5
624 U41840-J-Z125-7-76
Table 42: Compliance with Standards
Additional Specifications for Entry Model
Table 43: Selected Server Specifications for Entry
Compliance with Standards
Product Safety UL60950-1, CSA60950-1, EN60950-1, IEC60950-1, GOST
Electromagnetic Compat-
ibility
FCC Part-15 Class A, ICES-003 Class A, EN55022 Class A, VCCI Class
A, AS/NZS CISPR22 Class A, CNS13438(C6357) Class A, C-Tick, BSMI
Electromagnetic
Immunity
EN 55024
CE Certification Electromagnetic Compatibility Directive 2004/108/EC, Low Voltage
Directive 2006/95/EC
Environmental
Compliance
RoHS-compliant (Restriction of Hazardous Substances), WEEE-
compliant (Waste Electrical and Electronically Equipment)
Compliance Notes There is general compliance with the safety requirements of all European
countries and North America. National approvals required in order to
satisfy statutory regulations or for other reasons can be applied for on
request.
Compliance Link http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx
Selected Server Specifications
Weight Approx. 25 kg
Disks 4 × 2.5" 600 GB SAS hard disk (10,000 rpm) and 6 or 12 × 2.5" 1 TB SATA
hard disk (7,200 rpm)
Interface to JX40 Storage
Module
LSI GEN3 - SAS 6G RAID Controller
Service Port 1 GbE
iRMC Port
(Console Device)
1 GbE
Internal RAID Controller LSI GEN3 – SAS 6G
RAID Level RAID 1 (1 + 1) for Operating System, StorNext and blockpool metadata
RAID 6 (4+2) for backup data
To Next Page
Loading...
