Configuration Wizards Replication Wizard
U41840-J-Z125-7-76 165
Figure 106: Replication Wizard: NAS Shares
Step 4: VTL Partition
1. Select a VTL partition in the Replication Settings for VTL Partitions section to
manage its replication settings (see Figure 107).
I
For help adding VTL partitions to the system, use the VTL Configuration Wizard
(see "VTL Wizard" on page 145).
2. To configure the partition to replicate its data to another system, enter the following
information under Send:
a) Select the Enable replication for selected partition check box to enable repli-
cation for the partition.
To Next Page
Loading...
