194 U41840-J-Z125-7-76
Windows Domain
The Windows Domain page allows you to join the ETERNUS CS800 to a Windows
workgroup or a Windows domain using SMB. To use a NAS share configured for the CIFS
protocol on a Windows network, you must first join the ETERNUS CS800 to a workgroup
or a domain. After you join the ETERNUS CS800 to a workgroup or a domain, CIFS shares
are available for use on the Windows network.
To access the Windows Domain page, on the NAS page, click the Windows Domain tab
(see Figure 125).
Figure 125: Windows Domain Page
Use the Windows Domain page to perform the following tasks:
● Join the ETERNUS CS800 to a Windows workgroup (see "Joining a Windows
Workgroup" on page 195).
● Join the ETERNUS CS800 to a Windows domain (see "Joining a Windows Domain" on
page 195).
To Next Page
Loading...
