Safety Instructions Important Information
22 U41840-J-Z125-7-76
I
You can prevent mechanical damage and damage to the CD/DVD drive, as well as
premature CD/DVD wear, by observing the following suggestions:
● Only insert CDs/DVDs in the drive when needed and remove them after use.
● Store the CDs/DVDs in suitable sleeves.
● Protect the CDs/DVDs from exposure to heat and direct sunlight.
Laser Information
The FC HBAs (Fibre Channel Host Bus Adapters) comply with IEC 60825-1 laser class 1.
Class 1M Laser Product (PRO/10GbE SR Server Adapter)
V
CAUTION!
● The laser device must be factory serviced ONLY by the responsible manufac-
turer! NO adjustments, service or maintenance is to be performed otherwise.
● Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Batteries
V
CAUTION!
● Incorrect replacement of batteries may lead to a risk of explosion. The batteries
may only be replaced with identical batteries or with a type recommended by
the manufacturer (see the technical manual for the system board).
● Do not throw batteries into the trash can. They must be disposed of in accor-
dance with local regulations concerning special waste.
● The battery must be disposed of in accordance with local regulations
concerning special waste.
● Replace the lithium battery on the system board in accordance with the instruc-
tions in the technical manual for the system board.
● All batteries containing pollutants are marked with a symbol (a crossed-out
garbage can). In addition, the marking is provided with the chemical symbol of
the heavy metal decisive for the classification as a pollutant:
Cd Cadmium
Hg Mercury
Pb Lead
To Next Page
Loading...
