202 U41840-J-Z125-7-76
Deleting a Workgroup User or Share Administrator
Delete a workgroup user or share administrator if the user or administrator no longer needs
to access CIFS shares.
To delete a workgroup user or share administrator, select the user or administrator and click
Delete.
I
You can select multiple users or administrators to delete at once.
ADS Share Permissions
To manage user access to CIFS shares when the ETERNUS CS800 is joined to a Windows
domain, use the MMC (Microsoft Management Console). Log onto the MMC on the domain
controller and access a share's properties to set share permissions for users.
I
In some cases, when you view file permissions on a Windows system, you will not
see the user and group information. Instead you will see the SID (security ID) which
appears as a series of numbers. This occurs when you move files (for example,
using a backup utility or DOS xcopy) from one system to another system, and the
user and group from the source system do not exist on the target system.
Often users and groups are unique to a particular scope, such as a Windows
system or an ADS domain. As a result, some assigned permissions might not be
available on the target system because the associated user and group do not exist
there. However, common groups (for example, Administrators, Users, and
Everyone) are recognized on most Windows systems and domains.
Advanced Setting
The Advanced Setting page allows you to enable or disable advanced SMB settings.
To access the Advanced Setting page, on the NAS page, click the Advanced Setting tab
(see Figure 131).
To Next Page
Loading...
