AIS Connect Configuration Wizards
174 U41840-J-Z125-7-76
Figure 113: AISConnect Wizard: About
Step 2: Proxy
If your network environment requires use of a proxy server, you must specify the proxy
server settings to enable AISConnect (see Figure 114):
1. Enter the proxy server information:
● Server - Enter the IP address of the proxy server.
● Port - Enter the port number of the proxy server.
● Authentication Enabled - Select the check box if the proxy server requires authen-
tication.
● NTLM Authentication Enabled - Select the check box if the proxy server requires
NTLM (NT LAN Manager) authentication.
● Username - Enter the username to use for proxy authentication.
● Password - Enter the password to use for proxy authentication.
● Country - Select the country where the ETERNUS CS800 is located.
2. Click Next.
To Next Page
Loading...
