Fujitsu ETERNUS CS800 S5 - Step 4: Add Users

Configuration Wizards OST Wizard
U41840-J-Z125-7-76 157
2. Click Add.
The LSU displays in the LSUs Added table.
3. (Optional) To add additional LSUs, repeat Steps 1–2.
To remove an LSU, select it in the LSUs Added table and click Delete.
4. Click Next to continue.
Figure 100: OST Wizard: Add LSUs
Step 4: Add Users
1. Enter information about the authenticated user (see Figure 101):
● Username - Enter the name of the authenticated user.
● Password - Enter the password for the authenticated user.
● Confirm Password - Enter the password again to confirm it.
● Description - (Optional) Enter a brief description of the authenticated user.
2. Click Apply.
The user displays in the Users Added table.
3. (Optional) To add additional users, repeat Steps 1–2.
To remove a user, select it in the Users Added table and click Delete.
4. Click Next to continue.