Configuration Wizards Email Alerts Wizard
U41840-J-Z125-7-76 171
3. Click Add.
4. (Optional) To add additional recipients, repeat Steps 1–3
5. Click Next to continue.
Figure 111: Email Alerts Wizard: Recipients
Step 4: Confirm
1. Review the settings you selected to make sure they are correct. If necessary, click
Previous to return to a previous step to make changes (see Figure 112).
2. To make changes to an e-mail recipient you added, first select the recipient and click
Delete to delete the recipient. Then click Previous to return to the previous step and
add a new recipient.
3. After you have confirmed all settings, click Finish. The wizard configures the
ETERNUS CS800 with the settings you selected.
To Next Page
Loading...
