Fujitsu ETERNUS CS800 S5 - Additional Specifications for Scale Mode

System Specifications S5 Additional Specifications for Scale Mode
U41840-J-Z125-7-76 625
Table 44: Selected Storage Module Specifications for ETERNUS JX40
Additional Specifications for Scale Mode
Table 45: Selected Server Specifications for Scale
Table 46: Selected Storage Module Specifications for ETERNUS DX80 S2
Selected ETERNUS JX40 Storage Module Specifications
Weight Approx. 35 kg (depending on the upgrading)
Disks 6, 12, 18 or 24 x 2.5" 1TB Nearline SAS hard disks (7,200 rpm)
Interface to Server SAS
RAID Level 1 to 4 x RAID 6 (4 + 2)
Selected Server Specifications for Scale
Weight Approx. 25 kg
Disks 16 × 2.5’’ 900 GB SAS hard disks (10,000 rpm); including 2 Hot Spare
Interface to DX80 S2
Storage Base Module
2 x 8 GbFC
Service Port 1 GbE
iRMC Port
(Console Device)
1 GbE
Internal RAID Controller LSI GEN 3 – SAS 6G
RAID Level RAID 1 (1 + 1) for Operating System
RAID 1 (1 + 1) for StorNext and blockpool metadata
Selected ETERNUS DX80 S2 Storage Module Specifications per Module
Weight Approx. 35 kg
Disks 12 × 3.5’’ 2, 3 or 4TB Nearline SAS hard disks (7,200 rpm7,200 rpm)
Interface to Server (from
Storage Base Module)
2 x 8 GbFC
RAID Level 2 × RAID 6 (4 + 2)