Configuration Wizards NAS Wizard
U41840-J-Z125-7-76 143
Figure 89: NAS Wizard: Share Access
Step 5: Add Share
1. Under Add Share, enter information about the NAS share (see Figure 90):
● Name - Enter the name of the NAS share.
● Description - (Optional) Enter a brief description of the share.
● Enable deduplication - Select the check box to enable data deduplication. Fujitsu
Technology Solutions recommends that you enable data deduplication to optimize
disk usage.
I
Data deduplication is enabled by default. You cannot enable or disable data
deduplication after the share is added.
● Hide from network browsing - (Windows shares only) Select the check box to
hide the share from network browsing. If selected, you cannot see the share when
browsing the network.
● Export Protocol - (Available only if you selected the Both option in "Step 2:
Protocol" on page 139) Select the export protocol for the share:
● CIFS - Select the CIFS option to use the share on a Windows network.
● NFS - Select the NFS option to use the share on a UNIX or Linux network.
To Next Page
Loading...
