U41840-J-Z125-7-76 431
Figure 260: Storage Array Diag File Page
To generate and download a system diagnostics file:
1. Click Generate New to generate a new storage array diagnostics file.
The system generates a new diagnostics file. This can take several minutes.
2. After the file finishes generating, refresh the Web browser to enable the Download
Current button.
3. To download the generated diagnostics file, click Download Current.
A dialog box displays asking if you want to open or save the file.
4. Click Save or OK to download the file.
Healthchecks
The Healthchecks page allows you to perform tests that verify the health and integrity of
the data deduplication blockpool. You can also configure the ETERNUS CS800 to automat-
ically run the healthchecks at specified intervals.
I
To configure the ETERNUS CS800 to automatically run the healthchecks at
specified intervals, use the "Configuration" > "Scheduler" page (see "Scheduling
Healthchecks" on page 284)
To access the Healthchecks page, on the Diagnostics page, click the Healthchecks tab.
To Next Page
Loading...
