432 U41840-J-Z125-7-76
The Healthchecks page contains the following tabs:
● "General"
● "Status"
General
The General page allows you to start running the healthchecks or stop them if they are
already running. When you start the healthchecks, only the healthchecks that are currently
enabled are run (see "Status" on page 433).
To access the General page, on the Healthchecks page, click the General tab (see
Figure 261).
Figure 261: General Page
The General page displays the following information about the most recently run health-
checks:
● Status - The status of the healthchecks (In Progress, Success, Failed, or Inter-
rupted).
● Progress - The percentage complete of the healthchecks.
● Start Time - The time the healthchecks started.
● End Time - The time the healthchecks ended.
Use the General page to perform the following tasks:
● To start all enabled healthchecks, click Start.
To Next Page
Loading...
