U41840-J-Z125-7-76 433
● To stop all healthchecks in progress, click Stop.
Status
The Status page allows you to view information about the most recent test results for each
healthcheck. You can also enable or disable a healthcheck.
The following healthchecks are available:
● De-Duplication - Checks the overall health of the blockpool. This healthcheck verifies
that the metadata in the namespace file and the data tags in the blockpool are correctly
in sync.
● Integrity - Checks the integrity of data in the blockpool. This healthcheck examines a
sample of data tags in the blockpool and verifies that the data has been properly stored
without errors or corruption.
To access the Status page, on the Healthchecks page, click the Status tab (see
Figure 262).
Figure 262: Status Page
The Status page displays the following information about the most recently run test for each
healthcheck:
● Healthcheck Name - The name of the healthcheck.
● State - The state of the healthcheck (enabled or disabled).
● Started - The time the healthcheck started.
To Next Page
Loading...
