434 U41840-J-Z125-7-76
● Finished - The time the healthcheck ended.
● Status - The status of the healthcheck (Success or Failed).
To enable or disable a healthcheck:
1. Select the healthcheck and click Edit.
The Edit Healthcheck page displays (see Figure 263).
Figure 263: Edit Healthcheck Page
2. Select the check box to enable the healthcheck.
Or clear the check box to disable the healthcheck.
3. Click Apply.
I
When healthchecks are run (manually or scheduled), only enabled healthchecks
are run.
V
CAUTION!
If a healthcheck fails when it is run, there may be a problem in the blockpool that
could cause replication or restore operations to fail. Contact Fujitsu Customer
Support if a healthcheck fails.
To Next Page
Loading...
