U41840-J-Z125-7-76 403
Use the Fibre Channel page to display recent fibre channel activity in dynamic graphs:
● The top graph reports data received and the bottom graph reports data sent.
● Select the port to monitor in the Fibre Channel drop-down box, or select Avg to display
an average of all ports.
● The horizontal axis displays time (0–100 seconds).
● The vertical axis displays data throughput (0–500 MB/s).
● Values that exceed the maximum value of the vertical axis are shown in lighter green.
● Each bar on the graph represents approximately 1 second of time.
● Hold the cursor over a bar to display the value of the bar.
CPU
The CPU page allows you to view CPU usage.
To access the CPU page, on the Performance page, click the CPU tab (see Figure 244).
Figure 244: CPU Page
To Next Page
Loading...
