U41840-J-Z125-7-76 399
Use the Inline page to display recent inline data flow activity in a dynamic graph:
● Select the amount of time to display in the Last list (1–24 hours).
● The horizontal axis displays time (in minutes).
● The vertical access displays inline throughput (0–200 MB/s).
I
The range represented by the Y-axis changes based on the maximum value,
increasing in 200 MB increments as needed.
● Each bar on the graph represents approximately 1 minute of time.
● Hold the cursor over a bar to display the value of the bar.
Ethernet
The Ethernet page allows you to view throughput performance for network send and
receive activity.
To access the Ethernet page, on the Performance page, click the Ethernet tab (see
Figure 241).
To Next Page
Loading...
