U41840-J-Z125-7-76 299
● A green border indicates a port is connected to a network.
● A red border indicates a port is configured but is not connected to a network.
● Click Update Port View to update the information on the diagram.
Date & Time
The Date & Time page allows you to set the system date and time of the ETERNUS CS800.
You can specify a Network Time Protocol (NTP) server to synchronize the system time with,
or you can manually enter the date and time.
V
CAUTION!
Changing the date and time settings requires a system reboot immediately after the
changes are applied. Wait for at least 15 minutes before logging back in.
I
If you intend to join the ETERNUS CS800 to a Windows network using Active
Directory for NAS storage, Fujitsu recommends using an NTP Server to set the
system date and time (see "Windows Domain" on page 194).
To access the Date & Time page, on the System page, click the Date & Time tab (see
Figure 185).
Figure 185: Date & Time Page
To Next Page
Loading...
