Installing the ETERNUS CS800 S5 Modules Installing the Components in the Rack
U41840-J-Z125-7-76 89
Installing a Storage Module in the Rack
V
CAUTION!
Do not uninstall the drives that are installed by default or move them to any other
slot. Contact your sales representative or maintenance engineer if drives that are
installed by default need to be uninstalled or moved to another slot.
Attaching the Slide Rails to the Rack
The position of the 1HU support bracket is determined relatively to the base line of the
Storage Base Module.
Locate the positions of the screws and the M5 cage nut with the help of the following
figure.
Figure 46: Locating the mounting position
Height of the
storage module
(2 HU)
M5 centering screw
M5 cage nut
M5 pan head screw
M5 cage nut (DX80 only)
1
1
2
2
To Next Page
Loading...
