Installing the Components in the Rack Installing the ETERNUS CS800 S5 Modules
90 U41840-J-Z125-7-76
Push the M5 cage nuts into the 2nd holes of the front rack pillars above the base line of the
storage module (1). For a DX80 storage module, push further M5 cage nuts into the 5th
holes too (2).
Figure 47: Inserting the Cage Nut
3. Attach the support bracket to the left rear rack pillar, see Figure 41.
4. Insert the pins of the left slide rail in the 1st and 3rd holes from the bottom of the support
bracket (see 1 in Figure 48).
Figure 48: Inserting the Pins of the Left Slide Rail
To Next Page
Loading...
