304 U41840-J-Z125-7-76
Changing CLI Passwords
Use the CLI passwords when logging onto the command line interface as an administrator
or monitor.
To change the CLI passwords:
1. Under CLI Administrator Login Settings or under CLI Monitor Login Settings,
select the Change password option.
2. Enter the following information:
● Old Password - Enter the old password.
● New Password - Enter the new password.
● Confirm New Password - Enter the new password again to confirm it.
I
The default password for the CLI Administrator account is spcc. The default
password for the CLI Monitor account is password.
I
Passwords are limited to 15 characters. All alphanumeric characters are
allowed, as well as underscores ( _ ) and hyphens ( - ).
3. Click Apply.
Resetting CLI Passwords
The default password for the CLI Administrator account is spcc. The default password for
the CLI Monitor account is password.
To reset the CLI account passwords to their default values:
1. Under CLI Administrator Login Settings or under CLI Monitor Login Settings,
select the Reset password to factory default option.
2. Click Apply.
SSL
The SSL page allows you to enable or disable SSL on the ETERNUS CS800. You can also
install a new SSL certificate to replace the Fujitsu Technology Solutions default SSL certif-
icate.
To access the SSL page, on the Security page, click the SSL tab (see Figure 187).
To Next Page
Loading...
