308 U41840-J-Z125-7-76
Login Session
The Login Session page allows you to specify the inactivity timeout for the ETERNUS
CS800 remote management console. The default timeout is 30 minutes.
When the remote management console is inactive for the specified period of time, the user
is automatically logged off and must log back on to continue (see "Accessing Remote
Management" on page 125).
To access the Login Session page, on the Security page, click Login Session (see
Figure 189).
Figure 189: Login Session Page
To specify the inactivity timeout:
1. In the Inactivity Timeout box, enter the number of minutes of inactivity before a user
is automatically logged off (1–60 minutes).
2. Click Apply.
Security Notice
The Security Notice page allows you to specify a message that will appear to all users
when logging on to the remote management console or the CLI (command line interface).
If a security notice message has been specified, the user must accept the message in order
to begin using the system. If no banner content has been specified, the user can use the
system immediately after logging on.
To Next Page
Loading...
