EasyManua.ls Logo

Fujitsu ETERNUS CS800 S5 - Page 281

Fujitsu ETERNUS CS800 S5
634 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuration OST
U41840-J-Z125-7-76 267
Figure 167: Accent Page
To configure Accent:
1. To enable Accent, select the Enable Inline Dedupe with Accent check box.
Or to disable Accent, clear the Enable Inline Dedupe with Accent check box.
2. To enable or disable encryption when sending OST data from the media server to the
ETERNUS CS800, select an option in the Encryption drop-down box:
None - OST data is not encrypted.
Default AES 128 - OST data is encrypted using AES 128-bit encryption.
Default AES 256 - OST data is encrypted using AES 256-bit encryption.
TLS with AES 256 - OST data is encrypted using AES 256-bit encryption with
Transport Layer Security (TLS).
I
Using 256-bit encryption provides a stronger level of security but may have an
impact on system performance in some situations.
3. If you selected the TLS with AES 256 encryption option, you must install the required
certificate and key files on the ETERNUS CS800:
Certificate File
Private Key File
Certificate Authority File

Table of Contents

Related product manuals