Fujitsu ETERNUS CS800 S5 - Page 111

Installing the ETERNUS CS800 S5 Modules Cabling within the ETERNUS CS800 S5 System
U41840-J-Z125-7-76 97
4. Connect the server module with the storage base module via 2 FC cables (4).
5. Connect the server module with the storage base module via 2 LAN cables for internal
management functions (5).
V
CAUTION!
The LAN cables must be plugged into the MNT ports of the storage base
module and not into the RMT ports.
Figure 54: Cabling a Scale System
65 43 21
Server
DX80 S2 base
DX80 S2 expansion
DX80 S2 expansion