210 U41840-J-Z125-7-76
Figure 134: Edit VTL Partition & Replication Settings Page
2. If the partition is online, click Offline to take the partition offline. To edit a partition, it
must be offline.
3. Under Partition Settings, enter information about the partition:
I
If you are editing a partition, only the Library Model, Number of Storage Slots,
and Number of Virtual Tape Drives options can be changed.
● Library Model - Select the library model emulated by the partition. The library
model determines the inquiry string returned to the host by the ETERNUS CS800.
The following library models are available:
● Fujitsu CS-TL
● ADIC Scalar 100, ADIC Scalar i2000, or ADIC Scalar i500
● ADIC Pathlight VX
● Number of Storage Slots - Enter the number of storage slots in the partition (up to
9,000).
I
One I/E slot is created for each storage slot up to a maximum of 240 I/E
slots.
● Number of Virtual Tape Drives - Enter the number of virtual tape drives in the
partition.
To Next Page
Loading...
