214 U41840-J-Z125-7-76
Figure 136: Media Add Page
To add virtual tape cartridges to a partition:
1. In the Partition drop-down box, select the partition where the media will be created.
2. Under Add Contiguous Media, enter information about the media:
● Initial Location - The initial location for cartridges after they are created (Storage
Slot or I/E Slot).
I
You cannot create more cartridges than the number of available slots in the
initial location. For example, if 50 I/E slots are available, you cannot create
more than 50 cartridges if the initial location is set to I/E Slot.
● Number of Media - The number of cartridges to create in the partition.
To Next Page
Loading...
