216 U41840-J-Z125-7-76
Figure 137: Media Actions Page
To perform actions on virtual tape cartridges:
1. In the Partition drop-down box, select the partition that contains the cartridges to work
with.
I
Select UNASSIGNED to work with cartridges that are not assigned to any
partition.
The table displays the following information for all virtual tape cartridges in the partition:
● Barcode - The barcode number of the cartridge.
● Type - The cartridge type (LTO or SDLT).
● Partition - The partition where the cartridge is located.
● WP - The write protect status of the cartridge (Write Enabled or Write Protected).
To Next Page
Loading...
