U41840-J-Z125-7-76 227
Figure 142: Edit Host Mapping Page
2. (Optional) Select the Use CCL check box to use the Command and Control LUN.
I
The CCL (Command and Control LUN) is not used in most environments. This
option is recommended for host access groups that contain an HP-UX host. It
can also be used if hosts that are not assigned to any host access group exist
in the SAN. The CCL is accessible to hosts only through LUN 0.
V
CAUTION!
If you are not sure if you should use CCL, contact Fujitsu Customer Support
before you enable this option.
3. Select the check boxes for the media changer and tape drives to add to the host access
group.
The LUN assignment displays next to the device.
4. Click Apply.
To Next Page
Loading...
