230 U41840-J-Z125-7-76
The Targets page displays the Target Port and WWPN for the currently configured targets.
The Backpanel Locations section displays a graphical representation of the Fibre
Channel and Ethernet ports as they appear on the rear of the system.
I
A mapped (green) status indicates that a host is currently logged on to the
appropriate Fibre Channel target port.
Select one or more targets and click Reset Target(s) to initiate a Fibre Channel reset on
the selected ports. A reset causes the ports to go through LIP (Loop Initialization Protocol).
Target Usage
Use the Target Usage page to view current target and device mappings for the ETERNUS
CS800.
To access the Target Usage page, on the Remote Host Access page, click the Target
Usage tab (see Figure 145).
To Next Page
Loading...
