U41840-J-Z125-7-76 281
6. Click Apply.
7. Refresh the browser window to make sure the event settings are applied.
V
CAUTION!
When adding multiple events of the same type, make sure the events do not
overlap. If two events of the same type overlap, the later event takes precedence
over the earlier event.
Scheduling a Share or Partition for Replication
Configure a replication schedule for a NAS share or VTL partition to automatically replicate
the share or partition data to the target system at regular intervals. Disable scheduled repli-
cation if you do not want to automatically replicate the share or partition data to the target.
I
For more information about configuring the ETERNUS CS800 for replication, see
"Replication" on page 341.
I
Disabling replication for a share or partition does not delete any scheduled
replication events for that share or partition. If you no longer want to schedule the
share or partition for replication, manually delete the schedule (see "Deleting a
Scheduled Event" on page 285).
To configure a replication schedule for a share or partition:
1. On the Scheduler page, add or edit an event in the NAS Replication or VTL Repli-
cation row (see "Adding or Editing a Scheduled Event" on page 279).
2. In the Share or Partition drop-down box, select the share or partition to schedule for
replication.
Only shares or partitions that are enabled for deduplication appear in the drop-down
box.
I
Scheduling a share or partition that has replication disabled will automatically
enable replication.
3. In the Target drop-down box, select the replication target you want to replicate the share
or partition to.
4. Click OK.
5. (Optional) Specify when and how often the event reoccurs (see "Setting Recurrence for
a Scheduled Event" on page 285).
6. Click Apply.
To Next Page
Loading...
