Configuration Notifications
U41840-J-Z125-7-76 317
Figure 195: Server Page
To specify the outgoing e-mail server:
1. In the Hostname or IP Address box, enter the hostname or IP address of the outgoing
e-mail server.
I
When entering IP addresses, never use an address that is in a reserved IP
address range. To see a list of reserved IP address ranges, click the quick tip
icon [?] located near the IP address field.
I
To use hostname format, you must specify at least one DNS IP address on the
Network page (see "Network" on page 286).
● In the From Email Address box, enter the return e-mail address displayed in
e-mails sent by the ETERNUS CS800.
Specify a return address that lets you easily identify the system that generated
the e-mail (for example, systemname@any-domain.com). The return address
must contain an @ symbol and a valid domain name, including a period.
2. Click Apply.
Test
The Email Test page allows you to send a test e-mail to verify that e-mail notifications are
correctly configured on the ETERNUS CS800.
To access the Email Test page, on the Email page, click the Test tab (see Figure 196).
To Next Page
Loading...
