U41840-J-Z125-7-76 369
Figure 223: Edit Share Settings Page
2. Select the Enable to receive Directory/File Based replication data check box to
enable Directory/File Based Replication for the share.
Or clear the Enable to receive Directory/File Based replication data check box to
disable Directory/File Based Replication for the share.
3. Enter a Sync ID in the box.
The Sync ID is used to identify the source share that will send replicated data to the
target share. The Sync ID
must be identical to the Sync ID of the source share on the
source system.
4. Select an Access option:
● Locked - The share is not allowed to receive new Directory/File Based Replication
data.
● Unlocked - The share is allowed to receive new Directory/File Based Replication
data.
5. Click Apply.
To Next Page
Loading...
