Space Reclamation Utilities
440 U41840-J-Z125-7-76
● Space Reclaimed - The amount of disk space reclaimed. This value is 0 while space
reclamation is running and while display the total reclaimed value after space recla-
mation is complete.
Use the General page to perform the following tasks:
● To start space reclamation, click Start.
● To stop space reclamation, click Stop.
● To update the display while space reclamation is running, click Refresh.
Space Reclamation Status
Space reclamation can have one of the following statuses:
● Reclamation Completed - Space reclamation completed without errors.
● Reclamation Started by User - Space reclamation was started manually by a user.
● Reclamation Interrupted - Space reclamation was interrupted and must be restarted.
● Reclamation Interrupted by User - Space reclamation was interrupted by a user and
must be restarted.
● Reclamation Interrupted - Error Encountered - Space reclamation was interrupted
because an error was encountered and must be restarted.
● Reclamation Interrupt by User - Cannot be interrupted at this time - Because the
system is in a Low Space state, space reclamation cannot be stopped. Wait for space
reclamation to finish freeing up disk space.
● Reclamation Completed - No Candidates To Delete - Space reclamation completed,
but there were no candidates for reclamation.
● Reclaim Existing Blockpool Freed Space - The existing blockpool space has been
reclaimed for use.
● Stage 1 of 4 - Reclaim Disk Space (Initial).
● Stage 2 of 4 - Calculating Deletion Candidates.
● Stage 3 of 4 - Deleting New Candidates.
● Stage 4 of 4 - Reclaim Disk Space.
To Next Page
Loading...
