442 U41840-J-Z125-7-76
To securely erase data on the ETERNUS CS800:
1. Delete the data you want to securely erase:
● Delete files on NAS shares, or delete the shares (see "NAS" on page 187).
● Delete backup images on OST logical storage units (LSUs), or delete the LSUs and
storage servers (see "OST" on page 241).
● Recycle (erase) tape cartridges on VTL partitions, or delete the partitions (see
"VTL" on page 204).
2. Run space reclamation from the Utilities > Space Reclamation page (see "Space
Reclamation" on page 438).
3. Make sure all replication and backup jobs are completed (see "Replication" on
page 341).
4. On the Secure Shred page, click Start Shred.
A warning message displays.
5. Click Yes.
The system reboots and begins the secure shred process. This process can take
multiple days to complete.
6. To check the status of secure shred, log onto the ETERNUS CS800 to view the limited
Secure Shred Mode interface (see Figure 269).
● The Secure File Shred Log displays details about the secure shred progress. Click
Hide to hide the log.
● To cancel the secure shred process, click Cancel. The ETERNUS CS800 reboots
and resumes normal operation.
● When the secure shred process is complete, the Reboot button displays.
I
You must log on as an Admin user to cancel secure shred or reboot the system.
To Next Page
Loading...
